The TriggerFish Control Box Kit provides the control system for the TriggerFish ROV. This kit does not include thrusters, tether, or frame materials, giving flexibility for custom builds or replacements.
The control system is housed in a compact protective case. Two joysticks allow intuitive control of four motors: one joystick for forward, reverse, and turning, and the other for vertical and sideways movement. The system provides variable speed control, from slow to full power.
The TriggerFish Control Box is video-ready, with two video input channels and power outputs for monitors and cameras (sold separately). A volt and ammeter, along with LED indicators, display system status, and modular connections allow control boxes and vehicles to be interchangeable.
What's Included
Control Box
Triggerfish Box (Rev 4) (machined yellow box - large hole, no rib) – 1 ea
Triggerfish Box Plate 1 – 1 ea
Triggerfish Box Plate 3 – 1 ea
Triggerfish Box Plate 4 – 1 ea
Triggerfish Box Sticker – 1 ea
Terminal Block - 8 Position (Blue) 5.08mm – 1 ea
Joystick – 2 ea
Joystick 3 pin connector wire – 2 ea
Joystick 3-pin Header Connector – 4 ea
Amp/Volt/Watt Meter for Triggerfish – 1 ea
TF/UD Power Rocker Switch – 1 ea
Power Cord 18 Ga. (red/black zip cord) – 30 cm
Power Cord 16 Ga. (red/black zip cord) – 45 cm
Heatsink compound – 2, 1g pkg
Triggerfish Main Control Board (Rev 4) – 1 ea
Sabertooth Motor Controller with water resistant coating – 2 ea
Reclaimed Wire (18 gauge, red) cut to 5in lengths - 1 ea
Reclaimed Wire (18 gauge, black) cut to 5in lengths - 1 ea
Reclaimed Wire (18 gauge, yellow) cut to 5in lengths - 1 ea
Reclaimed Wire (18 gauge, blue) cut to 5in lengths - 1 ea
Reclaimed Wire (18 gauge, orange) cut to 5in lengths - 1 ea
Reclaimed Wire (18 gauge, white) cut to 5in lengths - 1 ea
Reclaimed Wire (18 gauge, brown) cut to 5in lengths - 1 ea
Reclaimed Wire (18 gauge, green) cut to 5in lengths - 1 ea
Control Board Hardware Bag
Steel Phillips Rounded Head Screws 8-32 Thread Size, 1/4" Long - 4 ea
Steel Phillips Rounded Head Screws 8-32 Thread Size, 1/2" Long - 4 ea
Aluminum Hex Standoff - 5/8" x 5/16" x 8-32 - 4 ea
Control Box Hardware Bag
Steel Phillips Rounded Head Screws 8-32 Thread Size, 1-1/2" Long - 2 ea
Steel Phillips Rounded Head Screws 8-32 Thread Size, 3/4" Long - 6 ea
Steel Locknut with External-Tooth Lock Washer Zinc-Plated, 8-32 Thread Size, 11/32" Wide - 8 ea
Phillips Rounded Head Screws for Sheet Metal Zinc-Plated Steel, Number 4 Size, 1/2" Long - 4 ea
TriggerFish/Barracuda Backplane Board Kit
MATE Backplane Board - 1 ea
Powerpole Connector Housings (RED/BLACK bonded pair housings only - without crimp lugs) - 1 ea
