Barracuda Control Board Replacement Kit
Barracuda Control Board Replacement Kit - view 1

Barracuda Control Board Replacement Kit

The Barracuda Control Board Replacement Kit provides all parts required to replace the Barracuda control board.

Free shipping on orders over $100. View shipping policy
Secure Checkout
30-Day Returns
Ships in 2-5 Business Days

Product Overview

The Barracuda Control Board Replacement Kit provides all parts required to replace the Barracuda control board. This kit is included in the full Barracuda ROV kit but can be purchased separately if the board needs replacement or if you want to refresh the ROV for a new group by having students assemble the board again.

What's Included

  • Header Connector - 3 position - 4 ea
  • Power Cord 18 Ga. (red/black zip cord) 12 inches - 1 ea
  • Power Cord 16 Ga. (red/black zip cord) 18 inches - 1 ea
  • Barracuda Control Board (Rev 1) - 1 ea
  • Barracuda Bluetooth Module - 1 ea
  • Reclaimed Wire (18 gauge, red) cut to 5" lengths - 1 ea
  • Reclaimed Wire (18 gauge, black) cut to 5" lengths - 1 ea
  • Reclaimed Wire (18 gauge, yellow) cut to 5" lengths - 1 ea
  • Reclaimed Wire (18 gauge, blue) cut to 5" lengths - 1 ea
  • Reclaimed Wire (18 gauge, orange) cut to 5" lengths - 1 ea
  • Reclaimed Wire (18 gauge, white) cut to 5" lengths - 1 ea
  • Reclaimed Wire (18 gauge, brown) cut to 5" lengths - 1 ea
  • Reclaimed Wire (18 gauge, green) cut to 5" lengths - 1 ea
  • Voltage Regulator - 9V - 1 ea
  • MOSFET N-CH 40V 45mA - 2 ea
  • Bi-color LEDs (GRN/RED) - 4 ea
  • DIODE SCHOTTKY 20V 1A - 2 ea
  • Capacitor - Ceramic 1uf 100v - 3 ea
  • Header Connector - 3 position - 4 ea
  • Header Connector - 4 position - 1 ea
  • Receptacle Connector - 3 position - 4 ea
  • Receptacle Connector - 4 position - 1 ea
  • Header Connector Terminal strip (50 pin) - 1 ea
  • Resistor 1k-ohm - 7 ea
  • Resistors 2k-Ohm (small body) - 2 ea
  • Resistors 10k-Ohm (Barracuda) - 2 ea
  • Mini Blade Fuse Holder - PCB - 1 ea
  • 3 Amp Mini Blade Fuse (Violet) - 1 ea
  • Shorting jumper (0.1" pitch) - 4 ea
  • RELAY GEN PURPOSE SPDT 10A 12V - 2 ea
  • Capacitor - Aluminum 220 uf 25v - 1 ea
  • Capacitor - Ceramic 1uf 100v - 2 ea
  • Capacitor - Aluminum 1000 uf 16v - 2 ea
  • Diode 150V 2A - 1 ea
  • Mini Blade Fuse Holder - PCB - 1 ea
  • 3 Amp Mini Blade Fuse (Violet) - 1 ea
  • 7mm Black Heat Shrink [inches] - 6 inches
  • Radial Inductor - 1 ea
  • Bi-color LEDs (GRN/RED) - 6 ea
  • Receptacle Connector - 5 position - 3 ea
  • Resistor 1k-ohm - 5 ea
  • 30 Amp Powerpole Connector Housings (One RED/BLACK bonded pair with two 30amp crimp lugs) (requires 3-PWR-7008-AA-01 Powerpole crimper for installation) - 4 ea
  • 45 Amp PCB Contact - Horizontal (Bottom), right angle mount - 4 ea

Customer Reviews