TriggerFish/Barracuda Backplane Board Kit (Rev 3)

This is a replacement kit for the Triggerfish Barracuda backplane board. This kit comes included in the full Triggerfish or Barracuda ROV kit. The replacement kit is only needed if an issue occurs and the backplane board needs to be replaced, or if you want to remove the backplane board so a new group of students can solder and assemble the backplane board.

Triggerfish Backplane Board Kit

• Powerpole Connector Housings (RED/BLACK bonded pair housings only - without crimp lugs)
• Header Connector - 5 position
• 1/4" Quick Connect Female, 14-16 AWG fully insulated
• Power Cord 16 Ga. (red/black zip cord)
• Tether Connector - 12 pin - male/female set
• Reclaimed Wire (18 gauge, red) cut to 5" lengths
• Reclaimed Wire (18 gauge, black) cut to 5" lengths
• Reclaimed Wire (18 gauge, yellow) cut to 5" lengths
• Reclaimed Wire (18 gauge, blue) cut to 5" lengths
• Reclaimed Wire (18 gauge, orange) cut to 5" lengths
• Reclaimed Wire (18 gauge, white) cut to 5" lengths
• Reclaimed Wire (18 gauge, brown) cut to 5" lengths
• Reclaimed Wire (18 gauge, green) cut to 5" lengths

Tether Connector (12 pin) hardware bag

• Steel Nut (M3 x 0.5 mm Thread) – 4 ea
• Steel lock washer (M3) – 4 ea
• Steel Pan Head Phillips Screw (M3 x 0.5 mm Thread, 12 mm long) – 4 ea

SeaMATE TriggerFish/Barracuda Backplane Component Bag (Rev 4)

• Bi-color LEDs (GRN/RED) – 2 ea
• Resistors 1k-Ω – 2 ea
• Steel Phillips Rounded Head Screws 8-32 Thread Size, 3/4" Long – 4 ea
• Steel Locknut with External-Tooth Lock Washer Zinc-Plated, 8-32 Thread Size, 11/32" Wide – 4 ea
• Nylon spacers for TF-BA Backplane – 4 ea
• BNC Connector Jack, Female Socket - Panel Mount – 2 ea
• Video power jack – 1 ea
• Terminal Block - 4 Position (Black) 3.5mm – 1 ea
• RCA Jack Mono Connector - PCB – 2 ea
• Mini Blade Fuse Holder - PCB – 1 ea
• 15 Amp Mini Blade Fuse – 1 ea
• 45 Amp PCB Contact - Vertical mount, short tail contact – 2 ea