PufferFish ROV Control Box Kit

This is for the Pufferfish ROV Control Box Kit only. The Pufferfish ROV kit with thrusters and tether is available here.

The Pufferfish makes ROV building fun, educational, and straight-forward. The Pufferfish ROV Control Box Kit is the control system only. It does not include the wires to receive and deliver power, thrusters (motors, propeller adapters, and propellers), or a frame. Frame materials can be purchased from your local hardware store.

The control system is enclosed in a small, durable box with an O-Ring seal and a clear top ergonomically designed for younger hands.  LED light indicators (indicating motor direction and power) and an amp/volt meter makes operating and troubleshooting the Pufferfish ROV easy.  The Pufferfish ROV kit features robust rocker switches that are not soldered to the circuit board and can be easily replaced and a circuit board with a power filter, allowing for the attachment and protection of add-on electronic tools such as cameras. The Pufferfish kit does require students to solder components onto a printed circuit board. 

Detailed assembly instructions are available for the Pufferfish kit, including video lessons, classroom activities, and many more topics here. You will need to register to access our lesson plans, however, registration is free. 

Pufferfish Control Box Kit (Rev 7)

• Pufferfish Control Box Enclosure (w/ 4 Screws) – 1 ea
• Pufferfish Control Box Wrap Sticker – 1 ea
• Amp/Voltmeter for Pufferfish – 1 ea
• DPDT Rocker Switch (splash-resistant) – 4 ea
• Flex Strain Relief Connector 3/8" (with Nut) – 1 ea
• Dome Strain Relief Connector 3/8" – 1 ea
• Strain Relief Connector Lock Nut 3/8" – 1 ea
• 1/8" flathead screwdriver – 1 ea

Pufferfish Circuit Board Kit

• Pufferfish Printed Circuit Board (Rev 7) – 1 ea
• Amp/Voltmeter instructions for Pufferfish – 1 ea
• Terminal Block - 2 Position 5mm – 6 ea
• Terminal Block - 3 Position 5mm – 1 ea
• Switch Connectors – 20 ea
• Bi-color LEDs (GREEN/RED) – 4 ea
• Resistor 10 ohm – 3 ea
• Resistor 1k-ohm – 4 ea
• Capacitor - Ceramic 1uf 100v – 3 ea
• Capacitor - Aluminum 220 uf 25v – 1 ea
• Radial Inductor – 1 ea
• Diode 150V 2A – 1 ea

A power supply is not included in this kit. Please check out this link for more power options.