Free shipping within the United States on orders over $50*
This is a replacement kit for the Triggerfish Barracuda backplane board. This kit comes included in the full Triggerfish or Barracuda ROV kit. The replacement kit is only needed if an issue occurs and the backplane board needs to be replaced, or if you want to remove the backplane board so a new group of students can solder and assemble the backplane board.
The Triggerfish/Barracuda Backplane Kit includes:
MATE Backplane Board (Rev 3)
Powerpole Connector Housings (RED/BLACK bonded pair housings only - without crimp lugs)
Header Connector - 5 position
1/4" Quick Connect Female, 14-16 AWG fully insulated
Power Cord 16 Ga. (red/black zip cord)
Tether Connector - 12 pin - male/female set
Reclaimed Wire (18 gauge, red) cut to 5" lengths
Reclaimed Wire (18 gauge, black) cut to 5" lengths
Reclaimed Wire (18 gauge, yellow) cut to 5" lengths
Reclaimed Wire (18 gauge, blue) cut to 5" lengths
Reclaimed Wire (18 gauge, orange) cut to 5" lengths
Reclaimed Wire (18 gauge, white) cut to 5" lengths
Reclaimed Wire (18 gauge, brown) cut to 5" lengths
Reclaimed Wire (18 gauge, green) cut to 5" lengths
Tether Connector (12 pin) hardware bag
SeaMATE TriggerFish/Barracuda Backplane Component Bag (Rev 4)
*The continental United States is the area of the United States of America that is located in the continent of North America. The contiguous United States (also known as the United States Mainland) does not include Alaska, Hawaii, or any other territories under the control of the United States.
