TriggerFish Control Board (Rev 4) Replacement Kit

This is a replacement Triggerfish control board and includes all the components that go on the Triggerfish control board. This kit comes included in the full Triggerfish ROV kit. The replacement kit is only needed if an issue occurs and the Triggerfish control board needs to be replaced, or if you want to remove the Triggerfish control board so a new group of students can solder and assemble the board.

• TriggerFish Main Control Board (Rev 4) – 1 pcs
• Terminal Block - 8 Position (Blue) 5.08mm – 1 pcs
• Header Connector - 3 position – 4 pcs
• Power Cord 18 Ga. (red/black zip cord) – 12 inches
• Power Cord 16 Ga. (red/black zip cord) – 18 inches
• Reclaimed Wire (18 gauge, red) cut to 5" lengths – 1 pcs
• Reclaimed Wire (18 gauge, black) cut to 5" lengths – 1 pcs
• Reclaimed Wire (18 gauge, yellow) cut to 5" lengths – 1 pcs
• Reclaimed Wire (18 gauge, blue) cut to 5" lengths – 1 pcs
• Reclaimed Wire (18 gauge, orange) cut to 5" lengths – 1 pcs
• Reclaimed Wire (18 gauge, white) cut to 5" lengths – 1 pcs
• Reclaimed Wire (18 gauge, brown) cut to 5" lengths – 1 pcs
• Reclaimed Wire (18 gauge, green) cut to 5" lengths – 1 pcs
• SeaMATE TriggerFish Control Board Component Bag – 1 pcs