TriggerFish (Rev 4) Components Grab Bag

Sometimes things don't go as planned - this grab-bag includes a spare of each of the components used on a Triggerfish circuit board just in case something gets lost or damaged.

• TF/UD Power Rocker Switch – 1 ea
• Capacitor - Aluminum 220 uf 25v – 1 ea
• Capacitor - Ceramic 1uf 100v – 1 ea
• Capacitor - Aluminum 1000 uf 16v – 1 ea
• Diode 150V 2A – 1 ea
• Mini Blade Fuse Holder - PCB – 1 ea
• Nylon spacers for TF-BA Backplane – 4 ea
• 3 Amp Mini Blade Fuse (Violet) – 5 ea
• 15 Amp Mini Blade Fuse (Blue) – 5 ea
• Terminal Block - 8 Position (Blue) 5.08mm – 1 ea
• Radial Inductor (101) 100uh 1.4A 280 MΩ – 1 ea
• Bi-color LEDs (GREEN/RED) – 2 ea
• Receptacle Connector - 5 position – 1 ea
• Resistors 1k-Ohm – 2 ea
• 30 Amp Powerpole Connector Housings (One RED/BLACK bonded pair with two 30amp crimp lugs in a 1x2 bag) – 2 set
• 45 Amp PCB Contact - Horizontal (Bottom), right angle mount – 2 ea
• 1/4" Quick Connect Female, 14-16 AWG fully insulated – 3 ea
• 45 Amp PCB Contact - Vertical mount, short tail contact – 2 ea
• Solder & Seal Connector - Blue - 4 ea